Longboarding Safety: Is Riding a Longboard Safe?

Longboarding is a safe activity. The only thing to remember is that it is only as safe as you decide to make it. But the question is how to longboard safely.

As a rule of thumb, some longboarding disciplines are faster and more dangerous than others. 

So, how safe is longboarding? Riding on a longboard is not dangerous, but there are some safety rules for longboarding. To longboard safely, you must know that the method you use, where you ride, and what safety gear you wear all significantly impact how likely you are to be injured or killed in an accident.

How to longboard downhill safely?

These riders and racers often reach speeds of 50–60 mph, so you can imagine how dangerous this style of riding can be. However, longboarders that participate in this sport are among the most cautious. For intense downhill speedboarding, you need a full-face helmet, full-body leathers, and back protection gear.

 You’ll want some really good slide gloves if you’re doing hands-down sliding before high-speed bends.

1. Protective gear like this might make a longboard commuter’s ride safer than if they were just hopping lanes in traffic without any protection.
2. If you participate in organized racing, you can expect well-thought-out logistics, such as road closures and emergency planning.
3. If you want to go on a speed trip with your buddies, make sure you have a spotter who can warn you if a car is approaching around a blind bend. At corners, you’re more prone to wandering into the oncoming lanes at high speeds.
4. Even though downhill longboarding is inherently riskier than just cruising on your longboard, you can reduce the risks by following these simple rules.

How to stop a longboard?

If you’re new to longboarding, one of your primary concerns was probably which longboard to start with. How to prevent crashing and injuring yourself while riding your longboard at any speed and how to stop a longboard?

You can use various methods to slow down or stop on your longboard. It is possible to complete these tasks at speeds ranging from a crawl to a sprint, depending on their complexity. 

How to powerslide on longboarding?

When it comes to longboarding, mastering the art of power sliding is a must. I’ve always wanted to learn how to powerslide, even though it seemed terrifying to me as a beginner.

What are the benefits of being able to powerslide? When it comes to slowing down and stopping, this is a vital technique. 

The freeride and downhill longboarding sports are based on power sliding. However, if you’re just driving around town or commuting, it can be really helpful.

When you powerslide, you drive your board over the road at a 90-degree angle until your wheels stop spinning and you start skidding. Slowing down or stopping is easy when you’re dealing with friction.

To master the heelside standup powerslide, you must first master the following steps:

• Begin by gaining some momentum on a flat surface or a small incline.
• Pressing your front rail will cause a small toeside pre-turn.
• Then, with your weight down low, begin a sharp heelside turn.
• Push your board out with your back foot while turning to make a 90-degree change in the board’s direction.
• Lean backwards while doing all of the above simultaneously to skid.
• Once the slide is over, let go of the pressure on your rear foot and put all of your weight on your front foot.

How to not fall off a longboard?

Skateboarding and longboarding, like any other activity requiring quick movement, rolling, or technical balance, will always result in some mishaps. 

We all make mistakes while skating, whether it’s a pinecone that gets stuck in your truck or a secret water area that you can’t see. It’s not a question of if, but when.

A helmet, knee pads, or gloves can help prevent a fall like this. If you fall, the majority of your body will be protected by this.

Practicing at a slower pace allows you to master the fundamentals before moving on to more dangerous situations or faster speeds. 

A schoolyard or plaza with no cars or pedestrians would be an ideal place to learn how to longboard or skateboard. Once you’ve mastered the art of skating around and stopping by pulling your entire foot back, you can go on to skate on the roadways.

Learn to steer, push, and balance on only one “board leg” (your foot), and most importantly, learn to stop. Don’t skate too fast or too far beyond your abilities.

More Frequently Asked Questions

How to ride a drop through a longboard?

To ride a drop through a longboard, slide your back foot off of the board and onto the ground. 

It’s possible to tailslide if you’re at ease on the board. The tail should be dragged along the ground by pressing down with your back foot on the tail. However, the board will not fall out if you lean forward.

How to footbrake a longboard?

• Bend your knee and reposition your front foot.
• To begin, face forward and place your rear foot on the board parallel to your front foot.
• Slowly apply pressure while rolling your foot flat to make contact with the ground.
• Avoid letting your foot droop too far back when you increase the pressure on your foot brake.

Is riding a longboard safe?

Longboarding is not a dangerous sport in and of itself. However, it’s only as safe as you make it, which is entirely up to you. Some longboarding disciplines are more dangerous than others because they require a higher speed and greater risk.

Conclusion

To make longboarding as risk-free as riding a bike, you should take the necessary precautions before getting on your board. There are a few things to keep in mind before you get started on a longboard. Going long distances, you’ll want huge, grippy wheels that can roll over obstacles and cracks without halting you or sending you flying.

Williams Jayson

I am a longboarding enthusiast and a blogger. On this blog, I share tips, tricks, and advice based on my experience. I am dedicated to helping newbies improve their skills and enjoy this fun activity to the fullest.